3100-3200

Belltech 3" Drop Spindles - 73-87 C10

Fits: 73-87 Chevrolet C10 Silverado/Sierra (Half ton, 2wd only)
         73-91 Chevrolet Blazer/Jimmy/Suburban (Half ton, 2wd only)
"Square body style trucks"
  • 3" Drop Spindle
  • Direct bolt-on
  • 15" wheels or larger only
  • Fits OEM HD brakes 1.25" rotors
  • Use factory ball joints & Tie Rod ends
  • Maintains factory geometry & alignment
  • Maintains factory ride quality
  • Powdercoated high strength ductile iron castings
  • Includes step by step installation instructions
  • Lower center of gravity for increased handling
  • Can be used with lowering spring, air bags, coilovers for a more aggressive drop
*These spindles will increase the track width of your vehicle by approximately .45" per side. These were developed to allow the fitment of small diameter wheels (15" - 16") that were popular at the time of inception. Please make sure you are aware of this increase in track width before you purchase these lowering spindles.

15" wheels may require trimming of the control arms depending on the width and backspace of your 15" wheel. 

 

Front Lowering: 3.0"

1981-87 Notes

  • 1.00" thick brake rotor requires Belltech spindle 3200
  • 1.25" thick brake rotor requires Belltech spindle 3100

Installation Instructions

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
100%
(1)
0%
(0)
T
Tino Correa
BADLY MADE

1986 C10 INSTALLED FRONT SHOCK AND 3 INCH DROP SPINDLE WITH 15 INCH RIM AND SOMTHING HITS MY RIM. NOW I HAVE TO TAKE IT TO THE SHOP AND SPEND MORE MONEY THATS WHY I ORDERED IT SO I CAN DO IT MY SELF. THEY SHOULD AT LEAST SAY THAT THERE IS PROBLEM OR FIX IT!!!!!!

Some 15' wheels fit and all depends on width and backspace of the wheels. We have done these spindles on 15' wheels with no other modifications needed, but was a narrower wheel. BellTech makes no mention of this either, but will further describe this on our product page, as we are always open to feedback.